MOOG Barrel Washing Systems
Barrel cleaner as a hand-operated unit – with suction
MOOG H.S. Portable Barrel Washing System - "taking the washer to the barrel."
The portable H.S. series barrel washers are used in conjunction with any commercial pressure washer to ensure excellent tartrate and other particle removal from the inside of the barrel surface.
A suction pipe, available in various lengths to match the size of your barrels, allow the dirty water during the cleaning to be evacuated from the bottom of the barrel by a venturi-induced suction.
These units can be ordered with flexible shafts suitable for cleaning stacks of barrels on racks.
How the H.S. Series barrel cleaners work
The H.S. barrel cleaners work with a spray head that rotates in three dimensions, driven by an electric motor.
Through the simultaneous movement in all the rotation axes, a 360 degree spray pattern is formed, thereby thoroughly cleaning every location and every corner inside the barrel. This guarantees the most rational, efficient and economic cleaning of the inside of wine barrels.
With the help of the high-pressure water, an injector system integrated into the unit generates a vacuum that siphons off the dirty water that arises during the cleaning process. Although the water suply to the spray head is shut off using a ball valve after the cleaning process, the vacuum is maintained further, and sucks out the water remaining in the barrel.
Barrel washers with a rigid suction pipe can be adapted to different barrel sizes using extensions.
MOOG H.S. barrel cleaners be connected to any commercially-available high-pressure cleaner or any stationary high-pressure pump (we recommend a total output rate of at least 13 litres/minute to guarantee a correct suction effect).
Features
- For 225 l to 600 l barrels stored and moved in a row
- Easy handling thanks to the handle and the barrel support
- Choice of motor voltage as an option
- Ball-bearing mounted suction foot
- Flex model utilizes a flexible portion of the shaft to allow easy insertion into stacked barrels for "clean on site" applications.
H.S. Standard 4.02
Material
Stainless steel 304/Brass
Drive
230V, 17 rpm
Motor protection cover in stainless steel
Minimum size of bunghole
37 mm 1.45"
Equipped with handle, barrel support and bunghole mount - 37/56mm 1.45"/2.20"
Water connection
High pressure inlet M22x1,5
Drain water outlet - 16 mm 0.62"
Nozzles
2x, fan jet 5°
* manufactured entirely of stainless steel available on request
H.S. Flex 2.02
Material
Stainless steel 304/Brass*
Drive
with angular gear 12VDC, 17 rpm (with mains adapter 230V, 50Hz)
Motor protection cover in stainless steel
Minimum size of bunghole
Ø 37 mm 1.45"
Equipped with barrel support, bunghole mount Ø 37/56mm 1.45"/2.20" and a flexible shaft
Water connection
High pressure inlet M22x1,5
Drain water outlet Ø 16 mm 0.62"
Nozzles
2x, fan jet 5°
* manufactured entirely of stainless steel available on request
H.S. Simplex / Simplex Flex
Material
Stainless steel 304/Brass
Drive
12VDC, 17 rpm (with mains adapter 230V, 50Hz)
Powder-coated motor protection cover
Minimum size of bunghole
Ø 37 mm 1.45"
Equipped with
bunghole mount Ø 37/56mm 1.45"/2.20"
Water connection
High pressure inlet M22x1,5
Drain water outlet Ø 16 mm 0.62"
Nozzles
2x, fan jet 5°
H.S. Simplex Flex additionally equipped with
angular gear and flexible shaft
Accessories
for all barrel cleaners H.S.
Pressure regulator for high pressure cleaners with pressure switch
- with built-in pressure gauge
- ensures trouble-free working with high pressure cleaners with automatic start/stop function
- connected to the drain water outlet
- facilitates the control of the cleaning progress
exclusively for H.S. Standard 4.02
Suction tube for 400 L barrelsSuction tube for 600 L barrels
Motor voltage 24, 36, 42, 48 and 115 Volt
exclusively for H.S. Simplex
Suction tube with suction foot for 400 L barrelsSuction tube with suction foot for 600 L barrels
FR MOOG Barrel Cleaning Stations
MOOG barrel washing systems are designed for the simultaneous washing of up to two barrels
Equipped with integrated high-pressure cleaning systems, manual or semi-automatic loading and raising/ lowering equipment depending on the model chosen, these units are ideally suited for use in medium-sized and larger operations.
How the FR barrel washing systems work
The mobile and stationary systems work with a spray head that rotates in three dimensions, driven by an electric motor.
Through the simultaneous movement in all the rotation axes, a 360 degree spray pattern is formed, thereby thoroughly cleaning every location and every corner inside the barrel. The dirty water that thereby arises flows away through drip trays.
This guarantees the most rational, effective and economic cleaning of the inside of wine barrels.
Mobile and stationary systems can be connected to any commercially-available high-pressure cleaner or any stationary high-pressure pump. Stationary systems are equipped with a high-pressure system as standard.
On customer request, these systems can be fitted with different kinds of washing cycles, such as steam or compressed air.
And where no standard products can be used, we can also offer customised versions.
FR 2
For the simultaneous cleaning of 2 barrels on a rackFor 225 l to 300 l wine barrels(other barrel sizes on request)
- Loading of the cleaning unit using a forklift
- Manual positioning of the barrels
- Manual insertion of the spray heads into thebarrels
- Rugged and mobile design made from stainless steel
- The cleaning operation can be programmed individually
- Specially designed, round-shaped spray heads for efficient cleaning
- Drain water collector
- Built-in pressure gauge indicates the working pressure
- Cold or hot water inlet
- Operating hours counter
Also equipped with:
Technical data
Built-in high pressure unit including
- a high pressure pump 21 L/min. 5.54 gal,100 bar 1450 psi (adjustable),
- water inlet temperature max. 60° C 140° F,- and an electric motor 3x400V
Options
- Inlet connection for an external hot water highpressurecleaner (max. 100°C 212° F)
- Splash guard made of acryl glass
- Steam generator connection
- Automated positioning of the barrels
- Automated insertion of the spray heads
- Collecting tank for yeast
Special design on request, such as:
FR 1 K
Mobile cleaning system with manual loading
For wine barrels from 225 l up to 300 l(optional up to 600 l)
- Easy loading and positioning of the barrel
- Rugged design made from stainless steel
- Specially developed spray head for efficient cleaning
- Limit switch for the automatic operation of the rotating spray head
- Drain water collector
Also equipped with:
Designs
FR 1 K/A
Equipped with a tank washer made of nickelplated brass, spray head Ø 40 mm
FR 1 K/D
Equipped with a tank washer made of stainless steel 316L, round-shaped spray head Ø 37 mm
Technical data
- Drive motor 230V/50Hz
- Plastic motor protection cover
- High pressure inlet 3/8"
- Can be connected to any commercial high-pressure cleaner or a stationary high-pressure pump
Options
- Stainless steel motor protection cover
- Motor voltage 24, 36, 42, 48 and 115 Volt,50Hz/60Hz
DUPLEX
System for the simultaneous cleaning of 2 barrels, with automated raising and lowering device
For wine barrels from 225 l up to 300 l (other barrel sizes on request)
- Convenient positioning of the barrels
- Automated system for raising and lowering the barrels
- Individually programmable cleaning cycles for cold water – hot water – cold water – draining
- Rugged design made from stainless steel
- Specially designed, round-shaped spray heads for efficient cleaning
Technical data
Built-in high pressure unit including
- a high pressure pump 21 L/min. 5.54 gal, 100 bar 1450 psi (adjustable), water inlet temperature max. 60° C 140° F,
- and an electric motor 3x400V
Options
- Inlet connection for an external hot water high-pressure cleaner (max. 100°C 212° F)
- Optical indicator of operational sequence
- Steam generator connection
- Automated barrel pick up lift
- Built-in high pressure unit for high temperature up to 80°C 176° F
